Maxi Marine Coil Electric - MMCE
Maxi Marine Coil Electric – MMCE is suitable for most marine hot water applications and is heated either with the built-in smooth piped, scale-resistant heating coil, the integrated electric INCOTEC immersion heaters (configurable from 5–250 kW, 230-690V) or both in combination. This enables the use of an external energy source, such as surplus heat from the vessel engine cooling system.
Unbeatable performance and energy flexibility
Maxi Marine Coil Electric – MMCE is suitable for most marine hot water applications and is heated either with the built-in smooth piped, scale-resistant heating coil, the integrated electric INCOTEC immersion heaters (configurable from 5–250 kW, 230-690V) or both in combination. This enables the use of an external energy source, such as surplus heat from the vessel engine cooling system.
The MMCE is equipped with thermostats adjustable from 40-70°C as standard. Thermostats 60-90°C is available as option. Please note that if 60-90°C thermostats are fitted the safety valve capacity must be recalculated to safeguard the higher energy output.Always ensure that the safety valve capacity is sufficient for the total energy output of the electric elements and heating coil combined.All configuration is available for customization. Inspection openings available on request.
Advantages
◽ Configurable to your needs
◽ Customizable electrical configuration (5–250 kW, 230-690 V)
◽ Customizable scale resistant internal coil heat exchanger
◽ 10 bar design pressure and high temperature water storage
◽ Class-leading corrosion resistance and long life expectancy
◽ Increase capacity with the TURBO MARINE SYSTEM heat exchanger (add-on)
◽ Flexible choice of energy source with TURBO MARINE SYSTEM (add-on)
Technical Data
◽ Max operating pressure: 10 bar
◽ Max storage temperature: 90°C
◽ Standard volumes: 200 L - 15 000 L (Volumes can be customized upon request.)
◽ ISOFLEX insulation, Cellular rubber upon request
Components
◽ Safety Temperature & pressure valve 10 bar / 99°C (discharge capacity 146kW)
◽ Thermostats: adjustable 40-70°C, preset 60°C
◽ Heating elements: 3 x 5 kW
◽ Heating elements: Scale resistant HEX coil
◽ Heating elements: Drain (see table )
◽ Heating elements: CW inlet/HW outlet (see table )
◽ Optional: Mixing valve & external heat exchanger: See separate marine add-ons
| Tank volume | Drain size | CW inlet & HW outlet | Coil Size | Safety equipment | Other connections |
| 200 - 400 L | 1" male BSP | 1 ½" female BSP | 1 m² tube HEX coil | T&P valve 10 bar / 99°C – 1" | Hotwater circ. 1" female BSP Temp. Sensor: ½" female BSP |
| 600 - 1000 L | 1" male BSP | 1 ½" female BSP | 1 m² tube HEX coil | T&P valve 10 bar / 99°C – 1" | Hotwater circ. 1" female BSP Temp. Sensor: ½" female BSP |
| 1500 - 15000 L | 1" male BSP | 2" female BSP | 1.98 m² tube HEX coil | T&P valve 10 bar / 99°C – 1" | Hotwater circ. 1" female BSP Temp. Sensor: ½" female BSP Air vent.: ½" female BSP |
Volume range
Specifications
The product specifications differ per version. Therefore, choose the desired version below to show the correct specifications.
Select a version:
- Material boiler tank : Stainless steel
- Material casing : Steel
- Heat transfer : Spiral
- Vertical positioning : Yes
- Max. primary operating pressure : 10
- Max. secondary operating pressure : 90
- With pressure reducing valve : Yes
- Protective anode : Yes
Are you interested or more information?
Would you like to receive an offer or would you like to know more about our products?
Contact us, for more information.